split solar street light
Lamp Specifications:
Power |
16W |
20W |
24W |
30W |
40W |
Voltage |
12V |
||||
Capacity of the battery |
≥16AH |
≥20AH |
≥24AH |
≥30AH |
≥40AH |
LED power |
30*30 SMD |
||||
LED lamination |
2400LM |
3000LM |
3600LM |
4500LM |
6000LM |
Inductive components |
Microwave sensor |
||||
The effective distance of the sensor |
6-8M |
||||
Wireless data transmission |
10M |
||||
Color of the lamp |
White, grey, blue |
||||
Working temperature range |
-20℃~65℃ |
||||
Working humility range |
Lower than 85% RH |
||||
Storage temperature range |
-5℃~35℃ |
||||
Storage humility range |
Lower than 50% RH |
||||
Working hour |
8H |
||||
Function of the controller |
Over-charging protection, over-discharging protection, short-circuit protection, inverse connection protection, automatic energy-saving mode |
||||
Cycle life |
≥600 cycles |
||||
Insulation measure |
Foamer |
Types of split solar street light available:

Advantage of Lithium Battery Solar Street Light:
- Simple design, portable, practical.
- Powered by solar, saving energy and environmental friendly, its installation is not subject to city grid.
- Large capacity lithium battery, lifespan about 5-8 years, twice lifespan of the traditional gel battery, lowering the battery maintenance rate of solar street lights.
- High efficiency of usage during the lithium cycle, avoiding the low efficiency of traditional gel battery after discharge which leads to lack of energy.
- Integrated lithium battery and controller, no complex assembly work, less wiring connection mistake, making the solar street lights installation easy and simple.
- No additional wiring is needed, avoiding the mistake of wrong calculation in wiring length and wiring configuration.
- Lithium battery installed on pole near the lamp, closer distance and less energy lose, ensuring high efficiency of power supply. What’s more, the hanging battery increases the difficulty for vandalism and theft than buried battery underground.
Working mode with microwave motion sensor:
- There are two working modes for integrated light: full power working mode and energy saving working mode.
- Energy saving working mode means the light will dim to 30 % working efficiency when nobody passes by. When people or vehicle passe by, the sensor will detect the motion and the light will lighten up to 100% efficiency. The brightness of the light will be reduced gradually to 25% after the people and vehicle pass away.
* The above configuration is only for reference and the actual configuration is designed according to the local climate conditions and the customer special requirements.
* We promise a guaranteed warranty for the entire system for two years, during which if there is any quality problem found, repair or replacement shall be provided free of charge, and a guarantee for life-long repair.
Components description:
![]() |
Solar panel
|
![]() |
LED lamp
|
![]() |
Light pole
|
- Previous Product:Customise solar led street light
- Next Product:Integrated Solar LED Street Light